Andreas

Kārlis> However, the issue you faced with incorrect distance measurements (leading to excessive mouse clicks for adjustments) > stems from a sample drift in the signal chain, likely due to one of t...

Regarding your comment“The standalone application is always installed by default, it is not possible to uncheck it for installation. The reason for this is that the standalone app is the central hu...

See my other posting where I explained my setup.There is nothing wrong with the signal chain.I validated by using different position around the listening spot, that the issues arise by being ≤ 47cm...

Thanks Kārlis for your very kind support. Bad luck. Lets see whether things are changing in a future release :-)

Removing it from blacklist solved the issue.Putting things onto a blacklist makes no sense.You name it .. possibly a rare edge case .. now tell me what it brings in such a case to automatically bla...

Thanks for your help.But after not being able to measure my HiFi corner and different issues I decided to give the product back, I initiated already the return.I restored my backup/disk image, to h...

Sorry gents, but it is a bad design to put something (and silently) on a black list.What should be the purpose to black list a driver? In most if not all cases this will be a temporary problem.And ...

Standalone application is not applicable here.  I  choosed “plugin” as installation type.So the expectation is, that Sonarworks does not integrate into the system and will only be loaded in the DAW...

I had no crash during the 1st measurement.Below the content of the blacklist file.There is an entry for the RME MADIface driver.Is it sufficient to remove this entry?Or can I remove the whole file ...