I want the Harman Target curve to be used. I need to calibrate my headphones to the Harman Target curve. It would be a good idea to add this feature.
Harman Target Curve Feature
Not planned
I want the Harman Target curve to be used. I need to calibrate my headphones to the Harman Target curve. It would be a good idea to add this feature.
Related to
3 comments
Hi, thanks for sharing your request! I've taken note of this for our product team :)
I want to heavily UP this post. Having Harman as an additional reference (maybe in the alternative devices section, where also the translation tests are) would be very, very helpful. Some projects just require me to check the mix on a Harman curve as well (as there are many headphones out there that fit more into the Harman than the flat/neutral region) and now I have to quit SoundID Reference, open an additional gain controller to my project to lower the ouput level to what I have to feed to my ADI-2 Pro fS BE, where the Harman-Target is saved as an individual DSP curve, that I of course have to turn on, first. Very annoying - because if I forget to switch on/off just one thing, I mix against whatever reference.
Cheers :)
Hello, I fully support this request. On all my mobile devices and headphones I used autoeq.app to equalize the sound to the Harman over-ear/ in-ear curves. Therefore, it would be highly desirable to do the same on my PC(s) using SoundID Reference. Honestly speaking, after having spent quite some money I was surprised that SoundID Reference does not support it and instead I have to use uncomfortable workarounds to get the crurves.