Kārlis Stenders

Surjyendu Ray thanks for posting!What is the phone model and Android version you're using? Can you send a screesnhot, or ideally, a screen video capture of the issue in action? 

Brandon Lett yes, you are correct: VM is applied on top of your headphone calibration profile, and any further Translation Check targets are also applied with the calibration profile still active.I...

Jonatan Janson I can see you have a support request open - we'll try to find a solution in the support thread, and then come back here to share the solution with others. Thank you!

Syoji Kawahara in case you are looking to calibrate this setup in 2.0 stereo (L&R daisy-chained through the subwoofer, subwoofer not on a separate channel), you can easily do this as shown here: Me...

galbugati2 have you already tried switching between the WASAPI/ASIO modes in Reference 4 Systemwide? Clearing the app configuration data might also help, see here: Deleting the config file in Refer...

Tom Lynn we would also love to see headphone profile export becoming available for RME and other integration partners. However, this requires additional development work on the partner's side. I re...

Mark Fassett it looks like this post was missed, our apologies for that! Can you provide some more details on the issue, please? If I'm understanding correctly, you have loaded the SoundID Referenc...

Louis Dufort thanks for posting your request! No, a dynamic spectrum analyzer is not available in any of the software modules. It is not exactly planned either, but we've had many requests for it. ...

Friedrich Stockhammer the SoundID Reference software uses only Sonarworks headphone profiles, based on our own measurements made in our in-house lab. Third-party headphone profiles and measurements...

Ruohuai Pan thanks for posting and apologies for the response delay! I'm afraid it is not possible to apply headphone calibration directly in DAR. We do have a direct integration with DAR, but it o...