I have Sonarworks 4 Reference
I have a question about the "Review setup dimensions" stage, early on in the measurement process, where it shows the physically distance between speakers. The image on the screen shows a vertical 2 way speaker, measuring from woofer to woofer.
What would I measure in a 3 way setup with? From midrange driver to midrange driver? I have my tweeter/midrange driver facing inwards, so technically my speakers are "wider" if you were to measure from the actual woofer.It's coaxial so midrange"="tweeter.
Thanks.
1 comment
controlstep yes, measure the midrange driver (from midrange to midrange): Speaker distance measurements: midrange drivers
Essentially, the measurement locating tone is 1 kHz, so if you have any doubts as to which driver to use, check which driver is covering the 1 kHz frequency in your speaker model user manual.