MIDI mapping in Systemwide

The MIDI mapping feature in Reference 4 Systemwide allows you to map parameters and control the app via an external MIDI device. 

In this article:

1. MIDI mapping
2. How to use MIDI mapping feature
3. Resetting MIDI maps

MIDI mapping

The MIDI mapping feature is available in Reference versions 4.4.2 and later. It currently allows you to control the following options:

• Preset selection
• Bypass button
• Mono mode
  

How to use MIDI mapping feature

To start using this feature you first have to assign MIDI controls to the features you wish to control.

There are two ways to access MIDI mapping mode depending on the option in question.

1. Dropdown menu
Calibration Presets



2. Right-click selection
Bypass button
Mono mode




After you have selected the Map MIDI option a new window will open and the software will listen to active MIDI signal to assign to the feature you wish to control.


Once Systemwide has recognized the MIDI control, it will then show up its designation and provide the option to save it.



Now that mapping has been saved, Systemwide will be able to call upon the chosen feature the next time it receives this MIDI input.

Resetting MIDI maps

You can reset all previously configured mapping by accessing the general Systemwide settings through the dropdown menu on the top right corner. 

Once in general settings page simply click on the "erase all MIDI mappings" button.